  * ku-smartstatus
    - fix: checks for lastck overflows fails if $hours is undefined
    - add: debug messages, -D or --debug option accepted

2026-01-03 14:33:10 1.0 ku25.12a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: on certain drives power on hours count and/or last check hours overflows
    	   on 65535, now fixes last check hours if possibile, otherwise set as power on
	   hours

2024-06-20 14:51:30 1.0 ku24.06b Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: abort if last check never run

2024-06-11 12:47:24 1.0 ku24.06a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: in long format the time of last check was meaningless, now shows the elapsed
    	   time from running and last check, and issues a warning if >2months

2023-08-28 10:39:20 1.0 ku23.08a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * debian/compat
    - upd: (devuan daedalus) raised to 10

2023-04-06 17:44:13 1.0 ku23.04a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: "Current_Pending_Sectors" (#198) parameter added to badblocks count, previous
    	   behaviour was to count only reallocated blocks (#197)
    - add: reports badblocks also; in the short listing under FAILS is displayed the sum
    	   of both; if there are only realloc but no badblocks, the WRN string (the drive
	   is not really failed, but is on the way)

2023-03-14 11:51:32 1.0 ku22.10a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: do no more uses Raw_Read_Error_Rate for health check (is not intended this way)
    - new: checks Pre-fails parameters for health
    - fix: composite, exadecimal raw values are now detected (hem .. at least we try)

2022-03-06 16:22:17 1.0 ku22.03a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - mod: replaced command print_time with age_real (see libku-utils-perl package
    	   >= 1.0-ku22.02a) -- note that there is no explicit depend on this package,
	   if age_real command is not available times are shown in hours units; you
	   need to install libku-utils-perl and libdate-calc-perl packages to use
	   age_real

2022-01-29 12:15:21 1.0 ku22.01a Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * ku-smartstatus
    - fix: "ok" status cleaned after searching for Raw_Read_Error_Rate, but this
	   entry is empty

  * install standards
    - upd: updated

2021-09-18 13:05:38 1.0 ku21.05 Lorenzo Canovi (KUBiC Labs, CH) <packager@kubiclabs.com>

  * production release ku21.05

  * meta: package owner
    - mod: Allblue SA dismissed, now is KUBiC Labs only
    - mod: from now releases uses the scheme YY.mm[patchlevel], where patchlevel
    	   usually is a locase letter; releases YY.mm (w/out patchlevel) are
	   production ones

2021-01-07 16:02:27 1.0 ku0.0 Allblue SA, KUBiC Labs (CH) <packager@kubiclabs.com>

  * new package:
    - ku-smartstatus
     	   from ku-base package
